diff --git a/families/timm_crossvit/README.md b/families/timm_crossvit/README.md
new file mode 100644
index 0000000000..fd0203ffc1
--- /dev/null
+++ b/families/timm_crossvit/README.md
@@ -0,0 +1,153 @@
+# timm CrossViT
+
+This family builds the timm CrossViT classifier (`timm/crossvit_9_240.in1k`) for
+`image_to_class_scores` as one TensorRT engine: 240 x 240 input, batch 1, fp16 or
+fp32 (the manifest uses fp16). The two branches (patch 12, width 128, 401 tokens;
+patch 16, width 256, 197 tokens) and the cross-attention between their class
+tokens run in the same engine. The family has no quantized build.
+
+## FP8 quantization study (not shipped)
+
+FP8 self-quantization of the encoder and cross-attention projections was built
+and measured on TensorRT 11.4 (and 11.1) for `timm/crossvit_9_240.in1k`. It is
+not shipped: at the family's builder optimization level (1) FP8 is 3% slower
+than fp16 on B200 and B300, and the FP8 engine changes the top-1 class of about
+3% of the images. The plan is 31% smaller. This section records the recipe, the
+method and the numbers, so that the study does not have to be repeated. The FP8
+code was not merged; this family has no FP8 build.
+
+### Summary and decision
+
+Batch 1, TensorRT 11.4, 1500 held-out ImageNet validation images (x is fp16 time
+over FP8 time):
+
+| Item | fp16 (manifest) | FP8 (fp16 engine) | FP8 vs fp16 |
+|---|---|---|---|
+| Latency, builder level 1 (family), B200 / B300 | 0.484 / 0.475 ms | 0.499 / 0.491 ms | 0.97x / 0.97x |
+| Latency, builder level 3, B200 / B300 | 0.452 / 0.436 ms | 0.453 / 0.425 ms | 1.00x / 1.03x |
+| Plan size, level 1 / level 3 (B200) | 18.2 / 20.2 MiB | 12.5 / 14.7 MiB | -31% / -27% |
+| Top-1 agreement with PyTorch fp32, B200 / B300 | 99.7% / 99.7% | 97.3% / 96.9% | -2.5 to -2.9 points |
+| ImageNet top-1, B200 / B300 (PyTorch fp32 73.47%) | 73.53% / 73.53% | 73.53% / 73.40% | within noise |
+| Non-finite outputs | 0 | 0 | none |
+
+Decision: do not ship FP8 for CrossViT.
+
+- Speed: at the family's level 1 FP8 is slower than fp16 on both GPUs. At
+  level 3 it is 1.00x on B200 and 1.03x on B300, so it is not faster on both.
+- Quality: the logit cosine to PyTorch drops from 0.99999 to 0.9959 (mean) and
+  from 0.999 to 0.976 (worst image); the top-1 class changes on about 3% of the
+  images. The fp16 engine changes it on 0.3%.
+- The only clear gain is plan size (5.7 MiB less).
+
+### Recipe that was measured
+
+No FP8 or NVFP4 checkpoint of a CrossViT model exists on the Hub, and no
+official quantization config exists for it. The recipe follows the ViT FP8
+recipe used for the `timm_vit`, `siglip` and `ast` FP8 builds: quantize the
+linears that read all tokens. Each quantized projection is built as
+`input -> Quantize -> Dequantize(fp16) -> MatMul`, with the weight
+`FP8 constant -> Dequantize(fp16)`.
+
+| Choice | Decision |
+|---|---|
+| Quantized | `attn.qkv`, `mlp.fc1`, `mlp.fc2` of the 12 encoder blocks (36), `attn.wk` and `attn.wv` of the 6 cross-attention blocks (12; one shared input scale) |
+| fp16 | encoder `attn.proj` (TensorRT 11.4 fails to build an FP8 Quantize right after the fused attention, also on a tiny engine), cross-attention `wq` and `proj` and the class-token projections (one row), patch embedding, norms, attention matmuls and softmax, heads |
+| Weight scale | per tensor, amax / 448 of the original fp32 weight, at build time |
+| Activation scale | static, per tensor; ModelOpt 0.46.1 `FP8_DEFAULT_CFG` (max calibration) on the timm model, 500 ImageNet validation images |
+| Outlier rule | an input scale above 20x the median of its kind stays fp16 (none found); a scale below the smallest normal fp16 value stays fp16 (one: `blocks.2.fusion.1.attn.wk`, weight scale 2.3e-5) |
+| Dequantize type | fp16; no non-finite value, fp32 Dequantize was not needed |
+
+### Method
+
+- GPUs: B200 and B300, one GPU per job; TensorRT 11.4.0.106 (target) and
+  11.1.0.106. In each job all engines were built and timed together.
+- Engines: fp16 from the family code at builder optimization level 1 (the
+  family setting) and at level 3 (only the level value replaced); FP8 from the
+  study code at the same two levels. The fp16 engine of the study code has the
+  same layer count as the family engine (188 on 11.4, 200 on 11.1).
+- Quality: ImageNet validation images from `clip-benchmark/wds_imagenet1k`. The
+  calibration set is 500 images at a stride of 100 over the class-sorted 50000.
+  The held-out set is 1500 images spread over the classes from a stride-12 set,
+  with every image of the calibration stride removed (500 on TensorRT 11.1).
+  Preprocessing is the timm transform; the reference is the timm model in fp32;
+  the fp16 engine is the floor.
+- Non-finite scan: the held-out images and 19 stress inputs (noise at std 1, 3,
+  10 and 30, constant images).
+- Speed: CUDA graph replay of 100 runs, median of 15 interleaved rounds (spread
+  under 0.2%).
+
+### Results
+
+Speed and size, batch 1 (x is fp16 time over FP8 time at the same level):
+
+| GPU | TensorRT | fp16 L1 ms | FP8 L1 ms | x L1 | fp16 L3 ms | FP8 L3 ms | x L3 | plan MiB fp16 to FP8 (L1 / L3) |
+|---|---|---|---|---|---|---|---|---|
+| B200 | 11.4 | 0.484 | 0.499 | 0.97 | 0.452 | 0.453 | 1.00 | 18.2 to 12.5 / 20.2 to 14.7 |
+| B300 | 11.4 | 0.475 | 0.491 | 0.97 | 0.436 | 0.425 | 1.03 | 18.2 to 12.5 / 21.2 to 14.6 |
+| B200 | 11.1 | 0.496 | 0.508 | 0.98 | 0.462 | 0.459 | 1.01 | 18.3 to 12.5 / 20.2 to 14.6 |
+| B300 | 11.1 | 0.486 | 0.502 | 0.97 | 0.445 | 0.424 | 1.05 | 18.2 to 12.6 / 21.2 to 14.6 |
+
+Quality, TensorRT 11.4, 1500 held-out images (PyTorch fp32 top-1 73.47%):
+
+| Engine | GPU | Top-1 | Agreement with PyTorch | Agreement with fp16 L1 | Logit cosine mean / min | KL(PyTorch, engine) |
+|---|---|---|---|---|---|---|
+| fp16 L1 | B200 | 73.53% | 99.73% | - | 0.99999 / 0.99904 | 0.00001 |
+| FP8 L1 | B200 | 73.53% | 97.27% | 97.40% | 0.99590 / 0.97777 | 0.0060 |
+| fp16 L3 | B200 | 73.47% | 99.73% | 99.87% | 0.99999 / 0.99911 | 0.00001 |
+| FP8 L3 | B200 | 73.60% | 97.00% | 97.13% | 0.99590 / 0.97582 | 0.0058 |
+| fp16 L1 | B300 | 73.53% | 99.73% | - | 0.99999 / 0.99911 | 0.00001 |
+| FP8 L1 | B300 | 73.40% | 96.87% | 96.93% | 0.99592 / 0.97766 | 0.0059 |
+| fp16 L3 | B300 | 73.47% | 99.87% | 99.87% | 0.99999 / 0.99900 | 0.00001 |
+| FP8 L3 | B300 | 73.53% | 97.13% | 97.27% | 0.99593 / 0.97913 | 0.0059 |
+
+TensorRT 11.1 (500 held-out images, PyTorch fp32 70.80%): FP8 agrees with
+PyTorch on 96.6% to 97.0% of the images, fp16 on 99.6% to 99.8%; the mean
+logit cosine is the same as on 11.4 (0.9959). No engine produced a non-finite
+output.
+
+Earlier run (TensorRT 11.4, level 1, B200; 1500 images that include 375 of the
+calibration images, so only the speed columns are comparable):
+
+| Variant | x batch 1 / 8 / 32 / 128 | plan MB | Agreement with PyTorch |
+|---|---|---|---|
+| recipe above | 1.00 / 1.02 / 1.04 / 1.05 | 13.1 | 96.2% |
+| MLP only (`fc1`, `fc2`) | 1.02 / - / - / - | 15.4 | 96.5% |
+
+Batches 8 to 128 are scratch builds (the family builds batch 1 only); B300 gave
+1.03x to 1.06x at batch 8 to 128.
+
+### Why there is no gain
+
+- At batch 1 the GEMMs are small (197 or 401 rows, widths 128 to 768). The
+  plan runs about 190 kernels of a few microseconds each, so the engine is
+  bound by kernel count, not by matmul math; FP8 GEMMs of this size are not
+  faster than fp16 ones, and each FP8 GEMM adds a Quantize of its input.
+- Not every projection is FP8: the 12 encoder `attn.proj` cannot be quantized
+  after the fused attention on TensorRT 11.4, and the class-token projections
+  have one row.
+- The gain grows only with batch (1.05x at batch 128), which the family does
+  not build.
+- The model is sensitive to FP8 activations: even the MLP-only variant changes
+  the top-1 class of 3.5% of the images.
+
+### NVFP4 (not tried)
+
+NVFP4 was not built. FP8 already gives no speedup at these GEMM sizes, and a
+4-bit format would lose more quality on a model that changes about 3% of its
+top-1 classes in FP8.
+
+### What was not tried
+
+| Item | Note |
+|---|---|
+| FP8 encoder `attn.proj` | build fails on TensorRT 11.4; retest on a newer release |
+| Q/DQ on the layer-norm output, fixed softmax-output scale, percentile or entropy calibration | not measured |
+| Native runtime with an FP8 bundle, H100 | not measured |
+
+### When to revisit
+
+- The family supports larger batches: FP8 then gives about 1.05x at batch 128.
+- A TensorRT release that builds the FP8 `attn.proj` after the fused attention
+  and fuses the input Quantize into the previous kernel.
+- A calibration or recipe that keeps the top-1 agreement within about 1 point
+  of the fp16 engine.