From c9e4cfb40d1d3c8b974ef844ac60bb5041fddeca Mon Sep 17 00:00:00 2001 From: Dmitry Ilyin <6576495+widgetii@users.noreply.github.com> Date: Sun, 18 Oct 2026 08:15:34 +0300 Subject: [PATCH] nor-split-layout: the openipc.org installer sets up the split layout too openipc.org now installs the GK7205V200 family with the u-boot--nor.bin bootloader and, where the -split package is published for the edition, writes firmware.bin at 0x50000 with the rest of the chip erased (OpenIPC/website#482, deployed). Builder's FPV editions publish no -split package and keep the two-image install. --- en/nor-split-layout.md | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/en/nor-split-layout.md b/en/nor-split-layout.md index 8444eeda..c5e22125 100644 --- a/en/nor-split-layout.md +++ b/en/nor-split-layout.md @@ -99,9 +99,17 @@ for before it installs a `firmware.bin`. on the first run. Run `sysupgrade -k -r` once more to move to the split layout. -[defib](https://github.com/OpenIPC/defib) can also set a camera up on the split -layout from scratch over UART: `defib install` with the `-split` package. That -erases the settings. +To set a camera up on the split layout from scratch, erasing its settings: + +- **[openipc.org](https://openipc.org):** open your SoC's page + (`/cameras/vendors/goke/socs/`, e.g. + [GK7205V300](https://openipc.org/cameras/vendors/goke/socs/gk7205v300)). + It installs the `u-boot--nor.bin` bootloader. Where the `-split` package + is published for your edition, it links that package and writes + `firmware.bin` at `0x50000` with the rest of the chip erased. Editions + without one, such as OpenIPC/builder's FPV builds, keep the two-image install. +- **[defib](https://github.com/OpenIPC/defib):** `defib install` with the + `-split` package, over UART. ### Upgrades and your settings