Preview the cutting plan with costs before generating the PDF

assets/i18n/en.json

@@ -630,7 +630,14 @@
   "currency.uae_dirham": "UAE dirham",
   "currency.us_dollar": "US dollar",
   "currency.vietnamese_dong": "Vietnamese dong",
+  "cutting_layout.edge_trim_must_be_0_to_100_mm": "Edge trim must be 0 to 100 mm.",
   "cutting_layout.stock_dimensions_must_be_1_1_000_000": "Stock dimensions must be 1-1,000,000 mm and saw kerf 0-100 mm.",
+  "cutting_layout.strategy_fewest_sheets": "Fewest sheets",
+  "cutting_layout.strategy_fewest_sheets_hint": "Tries several piece orders and cut directions and keeps the layout with the fewest sheets.",
+  "cutting_layout.strategy_largest_offcut": "Largest offcut",
+  "cutting_layout.strategy_largest_offcut_hint": "Uses the fewest sheets, then prefers the layout with the largest reusable offcut.",
+  "cutting_layout.strategy_rip_first": "Rip first",
+  "cutting_layout.strategy_rip_first_hint": "Makes full-length rips along the stock length first, then crosscuts inside each strip.",
   "cutting_plan.approx_nominal": "Approx. {stock} nominal",
   "cutting_plan.board": "BOARD",
   "cutting_plan.boards_required": {
@@ -683,6 +690,19 @@
   "cutting_plan.the_project_name_is_too_long_to_fit": "The project name is too long to fit above the workshop labels.",
   "cutting_plan.unnamed_part": "Unnamed part",
   "cutting_plan.workshop_labels": "Workshop Labels",
+  "cutting_view.calculating": "Calculating layout…",
+  "cutting_view.costs": "Costs",
+  "cutting_view.dimensions": "{} × {} × {}",
+  "cutting_view.layout_failed": "The cutting layout could not be calculated.",
+  "cutting_view.mark": "Mark",
+  "cutting_view.material": "Material",
+  "cutting_view.parts": "Parts",
+  "cutting_view.sheets": "Sheets",
+  "cutting_view.size": "Size",
+  "cutting_view.total": "Total",
+  "cutting_view.used_area_amount": "Used area ({currency})",
+  "cutting_view.used_area_note": "Used area prices each sheet by the area cut from it. Offcuts kept for later are not counted.",
+  "cutting_view.whole_sheets_amount": "Whole sheets ({currency})",
   "desktop_files.missing_project_output_path": "Missing BenchUp project output path",
   "desktop_files.missing_sketchup_file_path": "Missing SketchUp file path",
   "drawing_groups.the_drawing_could_not_be_grouped": "The drawing could not be grouped",
@@ -1132,9 +1152,12 @@
   "projects.could_not_save_project": "Could not save project: {error}",
   "projects.create_a_pdf_with_quantities_and_finished_cut": "Create a PDF with quantities and finished cut sizes.",
   "projects.create_one_label_per_piece_with_its_cutting": "Create one label per piece with its cutting-plan mark, name, and finished thickness, width, and length. Print at actual size on A4 paper.",
+  "projects.cut_layout_strategy": "Layout strategy",
   "projects.cutting_plan_pdf_opened_in_a_new_tab": "Cutting plan PDF opened in a new tab",
   "projects.cutting_plan_pdf_saved_and_opened": "Cutting plan PDF saved and opened",
   "projects.discard_changes": "Discard changes",
+  "projects.edge_trim": "Edge trim",
+  "projects.edge_trim_hint": "Removes this margin from each edge of sheet goods. Applies only to sheets at least 600 mm in both directions; narrower stock such as lumber is never trimmed.",
   "projects.exporting_geometry": "Exporting geometry…",
   "projects.exporting_screenshot": "Exporting screenshot…",
   "projects.generate_pdf": "Generate PDF…",
@@ -1146,6 +1169,7 @@
   "projects.geometry_recovered_from_a_damaged_sketchup_archive": "Geometry recovered from a damaged SketchUp archive. Some materials may be missing.",
   "projects.respect_wood_grain_direction": "Respect wood grain direction",
   "projects.align_part_grain_with_stock_length": "Align each part's assigned grain with the length of the stock.",
+  "projects.show_used_area_cost": "Show used-area cost",
   "projects.show_wood_joinery": "Show wood joinery",
   "projects.show_joinery_as_dashed_outlines": "Show joinery cuts as fine dashed outlines on each piece.",
   "cutting_plan.joinery_dashed_outlines": "Dashed outlines show joinery projected onto the stock face.",
@@ -1186,6 +1210,7 @@
   "projects.selected_parts_assemblies_visible_only": "Selected parts / assemblies (visible only)",
   "projects.the_file_operation_did_not_complete": "The file operation did not complete",
   "projects.this_project_belongs_to_connect_to_that_server": "This project belongs to {server}. Connect to that server in Account before opening it.",
+  "projects.used_area_cost_hint": "Adds a column that prices only the area cut from each sheet. Offcuts kept for later are not counted.",
   "projects.whole_project_visible_only": "Whole project (visible only)",
   "projects.wood_joint": "Wood joint #{id}: {error}",
   "projects.woodworking_cutting_plan": "Woodworking cutting plan",

assets/i18n/pt_BR.json

@@ -630,7 +630,14 @@
   "currency.uae_dirham": "Dirham dos Emirados Árabes",
   "currency.us_dollar": "Dólar americano",
   "currency.vietnamese_dong": "Dong vietnamita",
+  "cutting_layout.edge_trim_must_be_0_to_100_mm": "A margem da borda deve ficar entre 0 e 100 mm.",
   "cutting_layout.stock_dimensions_must_be_1_1_000_000": "As medidas da matéria-prima devem ficar entre 1 e 1.000.000 mm e a espessura da serra entre 0 e 100 mm.",
+  "cutting_layout.strategy_fewest_sheets": "Menos chapas",
+  "cutting_layout.strategy_fewest_sheets_hint": "Testa várias ordens de peças e direções de corte e mantém o layout com menos chapas.",
+  "cutting_layout.strategy_largest_offcut": "Maior sobra",
+  "cutting_layout.strategy_largest_offcut_hint": "Usa o menor número de chapas e, entre elas, prefere o layout com a maior sobra reaproveitável.",
+  "cutting_layout.strategy_rip_first": "Cortes longitudinais primeiro",
+  "cutting_layout.strategy_rip_first_hint": "Faz primeiro cortes longitudinais inteiros ao longo do comprimento da chapa e depois os transversais dentro de cada faixa.",
   "cutting_plan.approx_nominal": "Aprox. {stock} nominal",
   "cutting_plan.board": "TÁBUA",
   "cutting_plan.boards_required": {
@@ -683,6 +690,19 @@
   "cutting_plan.the_project_name_is_too_long_to_fit": "O nome do projeto é longo demais para caber acima das etiquetas de oficina.",
   "cutting_plan.unnamed_part": "Peça sem nome",
   "cutting_plan.workshop_labels": "Etiquetas de oficina",
+  "cutting_view.calculating": "Calculando o plano de corte…",
+  "cutting_view.costs": "Custos",
+  "cutting_view.dimensions": "{} × {} × {}",
+  "cutting_view.layout_failed": "Não foi possível calcular o plano de corte.",
+  "cutting_view.mark": "Marca",
+  "cutting_view.material": "Material",
+  "cutting_view.parts": "Peças",
+  "cutting_view.sheets": "Chapas",
+  "cutting_view.size": "Medida",
+  "cutting_view.total": "Total",
+  "cutting_view.used_area_amount": "Área usada ({currency})",
+  "cutting_view.used_area_note": "A área usada precifica cada chapa pela área cortada dela. Sobras guardadas para uso futuro não são contadas.",
+  "cutting_view.whole_sheets_amount": "Chapas inteiras ({currency})",
   "drawing_groups.the_drawing_could_not_be_grouped": "Não foi possível agrupar o desenho",
   "entity_gizmo.axis_lengths": "Comprimentos nos eixos: {}. {}. {}.",
   "entity_gizmo.object_lenghts": "Comprimentos do objeto",
@@ -1130,9 +1150,12 @@
   "projects.could_not_save_project": "Não foi possível salvar o projeto: {error}",
   "projects.create_a_pdf_with_quantities_and_finished_cut": "Gera um PDF com as quantidades e as medidas finais de corte.",
   "projects.create_one_label_per_piece_with_its_cutting": "Cria uma etiqueta por peça com a marca do plano de corte, o nome e a espessura, largura e comprimento finais. Imprima em tamanho real em papel A4.",
+  "projects.cut_layout_strategy": "Estratégia de disposição",
   "projects.cutting_plan_pdf_opened_in_a_new_tab": "PDF do plano de corte aberto em uma nova aba",
   "projects.cutting_plan_pdf_saved_and_opened": "PDF do plano de corte salvo e aberto",
   "projects.discard_changes": "Descartar alterações",
+  "projects.edge_trim": "Margem da borda",
+  "projects.edge_trim_hint": "Remove essa margem de cada borda das chapas. Só se aplica a chapas com pelo menos 600 mm nas duas direções; madeira mais estreita, como sarrafos, nunca é aparada.",
   "projects.exporting_geometry": "Exportando geometria…",
   "projects.exporting_screenshot": "Exportando captura de tela…",
   "projects.generate_pdf": "Gerar PDF…",
@@ -1144,6 +1167,7 @@
   "projects.geometry_recovered_from_a_damaged_sketchup_archive": "Geometria recuperada de um arquivo SketchUp danificado. Alguns materiais podem estar faltando.",
   "projects.respect_wood_grain_direction": "Respeitar a direção do veio",
   "projects.align_part_grain_with_stock_length": "Alinha o veio atribuído a cada peça com o comprimento da matéria-prima.",
+  "projects.show_used_area_cost": "Mostrar custo pela área usada",
   "projects.show_wood_joinery": "Mostrar encaixes",
   "projects.show_joinery_as_dashed_outlines": "Mostra os cortes de encaixe como contornos tracejados finos em cada peça.",
   "cutting_plan.joinery_dashed_outlines": "Contornos tracejados mostram os encaixes projetados na face da matéria-prima.",
@@ -1184,6 +1208,7 @@
   "projects.selected_parts_assemblies_visible_only": "Peças / conjuntos selecionados (somente visíveis)",
   "projects.the_file_operation_did_not_complete": "A operação de arquivo não foi concluída",
   "projects.this_project_belongs_to_connect_to_that_server": "Este projeto pertence a {server}. Conecte-se a esse servidor em Conta antes de abri-lo.",
+  "projects.used_area_cost_hint": "Adiciona uma coluna que precifica apenas a área cortada de cada chapa. Sobras guardadas para uso futuro não são contadas.",
   "projects.whole_project_visible_only": "Projeto inteiro (somente visíveis)",
   "projects.wood_joint": "Encaixe #{id}: {error}",
   "projects.woodworking_cutting_plan": "Plano de corte de marcenaria",

assets/i18n/zh_CN.json

@@ -630,7 +630,14 @@
   "currency.uae_dirham": "阿联酋迪拉姆",
   "currency.us_dollar": "美元",
   "currency.vietnamese_dong": "越南盾",
+  "cutting_layout.edge_trim_must_be_0_to_100_mm": "边缘修整必须在 0–100 mm 之间。",
   "cutting_layout.stock_dimensions_must_be_1_1_000_000": "原料尺寸必须在 1–1,000,000 mm 之间，锯缝必须在 0–100 mm 之间。",
+  "cutting_layout.strategy_fewest_sheets": "板材最少",
+  "cutting_layout.strategy_fewest_sheets_hint": "尝试多种零件顺序和切割方向，保留所需板材最少的排料。",
+  "cutting_layout.strategy_largest_offcut": "最大余料",
+  "cutting_layout.strategy_largest_offcut_hint": "先保证板材数量最少，再优先选择可复用余料最大的排料。",
+  "cutting_layout.strategy_rip_first": "先纵切",
+  "cutting_layout.strategy_rip_first_hint": "先沿板材长度方向做整长纵切，再在每个条带内横切。",
   "cutting_plan.approx_nominal": "约 {stock} 标称",
   "cutting_plan.board": "板材",
   "cutting_plan.boards_required": {
@@ -683,6 +690,19 @@
   "cutting_plan.the_project_name_is_too_long_to_fit": "项目名称过长，无法放在车间标签上方。",
   "cutting_plan.unnamed_part": "未命名部件",
   "cutting_plan.workshop_labels": "车间标签",
+  "cutting_view.calculating": "正在计算排料…",
+  "cutting_view.costs": "成本",
+  "cutting_view.dimensions": "{} × {} × {}",
+  "cutting_view.layout_failed": "无法计算排料。",
+  "cutting_view.mark": "编号",
+  "cutting_view.material": "材料",
+  "cutting_view.parts": "部件",
+  "cutting_view.sheets": "板材",
+  "cutting_view.size": "尺寸",
+  "cutting_view.total": "合计",
+  "cutting_view.used_area_amount": "按用料面积（{currency}）",
+  "cutting_view.used_area_note": "按用料面积计价时，每张板材按其实际裁下的面积计算。留作以后使用的余料不计入。",
+  "cutting_view.whole_sheets_amount": "整张板材（{currency}）",
   "desktop_files.missing_project_output_path": "缺少 BenchUp 项目输出路径",
   "desktop_files.missing_sketchup_file_path": "缺少 SketchUp 文件路径",
   "drawing_groups.the_drawing_could_not_be_grouped": "无法对绘图进行分组",
@@ -1132,9 +1152,12 @@
   "projects.could_not_save_project": "无法保存项目：{error}",
   "projects.create_a_pdf_with_quantities_and_finished_cut": "生成包含数量和成品下料尺寸的 PDF。",
   "projects.create_one_label_per_piece_with_its_cutting": "为每个部件生成一个标签，包含其下料方案编号、名称以及成品厚度、宽度和长度。请按实际尺寸在 A4 纸上打印。",
+  "projects.cut_layout_strategy": "排料策略",
   "projects.cutting_plan_pdf_opened_in_a_new_tab": "下料方案 PDF 已在新标签页中打开",
   "projects.cutting_plan_pdf_saved_and_opened": "下料方案 PDF 已保存并打开",
   "projects.discard_changes": "放弃更改",
+  "projects.edge_trim": "边缘修整",
+  "projects.edge_trim_hint": "从板材每条边去除此宽度。仅适用于两个方向都至少 600 mm 的板材；较窄的木料（如型材）不修边。",
   "projects.exporting_geometry": "正在导出几何体…",
   "projects.exporting_screenshot": "正在导出截图…",
   "projects.generate_pdf": "生成 PDF…",
@@ -1146,6 +1169,7 @@
   "projects.geometry_recovered_from_a_damaged_sketchup_archive": "从损坏的 SketchUp 归档文件中恢复的几何体。部分材质可能已丢失。",
   "projects.respect_wood_grain_direction": "遵循木纹方向",
   "projects.align_part_grain_with_stock_length": "使各构件的木纹方向与原材料（板材）的长度方向对齐。",
+  "projects.show_used_area_cost": "显示按用料面积计算的成本",
   "projects.show_wood_joinery": "显示木构接合处",
   "projects.show_joinery_as_dashed_outlines": "在各构件上以细虚线轮廓显示接合切口。",
   "cutting_plan.joinery_dashed_outlines": "虚线轮廓显示了投影在原材料（板材）表面上的接合处。",
@@ -1186,6 +1210,7 @@
   "projects.selected_parts_assemblies_visible_only": "所选部件 / 装配组（仅可见者）",
   "projects.the_file_operation_did_not_complete": "文件操作未完成",
   "projects.this_project_belongs_to_connect_to_that_server": "该项目属于 {server}。打开前请先在“账户”中连接到该服务器。",
+  "projects.used_area_cost_hint": "添加一列，仅按每张板材裁下的面积计价。留作以后使用的余料不计入。",
   "projects.whole_project_visible_only": "整个项目（仅可见者）",
   "projects.wood_joint": "木工接合 #{id}：{error}",
   "projects.woodworking_cutting_plan": "木工下料方案",

crates/benchup-app/src/app.rs

@@ -47,6 +47,8 @@ mod arc_tool;
 mod context_menu;
 #[path = "currency.rs"]
 mod currency;
+#[path = "cutting_view.rs"]
+mod cutting_view;
 #[path = "display_scene.rs"]
 pub(crate) mod display_scene;
 #[path = "construction_guides.rs"]