Skip to content
HexAirbotPublic

About

The BLE module for Flexbot

Resources

Stars

1 star

Watchers

2 watching

Forks

Latest commit

 

History

13 Commits

Folders and files

Repository files navigation

The firmware and hardware here are only for developers and hackers who are initerested in the BLE module of Flexbot.

Now, the firmware ‘FlexBLE_1.0.0_cc254x.hex’ is not compitable with the released apps(Flexbot 1.0.3 app for Android, Flexbot 1.0.1 app for for iOS).

Instead, you should use the code in branch dev_v2 of HexNanoController_iOS to test with the firmware.

# +--------+---------+--------------+-----------------------+----------------------------------------+
# | char   | address | value length |       access          |    more info                           |
# +--------+---------+--------------+-----------------------+----------------------------------------+
# | CHAR1  | 0xFFE1  |       6      |write without response |use for RC channels(app-->BLE module)   |
# |        |         |              |                       |                                        |
# +--------+---------+--------------+-----------------------+----------------------------------------+
# | CHAR2  | 0xFFE2  |       18     |write without response |use as rx(send data from the app        |
# |        |         |              |                       | to the rx port of the BLE module)      |                                       |
# +--------+---------+--------------+-----------------------+----------------------------------------+
# | CHAR3  | 0xFFE4  |       20     |notify                 |use as tx(receive data from the tx port |
# |        |         |              |                       | of the BLE module)                     |                                       |
# +--------+---------+--------------+-----------------------+----------------------------------------+
  • Connect the CC-Debugger

    • To your computer via USB

    • To the Flexbot BLE module, only five wires connections are needed *3.3V *GND *RESET *CC *DC

  • Select ‘Program CCxxxx SoC or MSP430’

  • Click on the ‘System-on-Chip’ tab

  • Use the following settings:

    • Set ‘Interface’ to ‘Fast’

    • Flash image

      • Browse to the .hex file you want to load onto the chip

    • Ensure ‘Retain IEEE when reprogramming the chip’ is checked

    • Select ‘Erase, program and verify’

  • Click ‘Perform Actions’)

Website

Wiki

Forum

About

The BLE module for Flexbot

Resources

Stars

1 star

Watchers

2 watching

Forks

Releases

Packages

Contributors