Jcorp Nomad

A portable, offline media server powered by the ESP32-S3 in a thumbdrive form factor.
Stream movies, music, books, and shows anywhere - no internet required.

Buy a Prebuilt Nomad | Support on Ko-fi

Firmware 4.6 - The biggest update since Mk4, and everything in it has come over from the experimental branch. exFAT card support, offline maps with turn by turn directions, game ROMs and a shelf of built-in games, local multiplayer, TV support over DLNA, a WiFi Mode that joins your home network, offline translation, and recipe + 3D model libraries. Everything from Mk4 is still here and still works, this adds on top of it.

Some of this is newer than the rest. The parts I'd call settled are exFAT, the reader and the media pages. Maps, WiFi Mode, DLNA and Translate work are all tested in full, but they have had less time in front of other people's hardware than the rest of the project. Known rough edges are listed near the bottom, everything works but some is getting more improvments so its user friendly. Maps in particular is tricky right now.

Firmware and the SD card template both change here, so you'll need to reflash and refresh your card files.

Also making a push to migrate fully to exfat, will be keeping fat32 legacy support so yall dont have to reformat your cards, but some of the advanced features will only work on exfat.

What is Nomad

Jcorp Nomad is an open-source offline media server designed for travel, remote work, classrooms, camping, and more. It runs entirely on an ESP32-S3, creates a local Wi-Fi hotspot, and serves media through a browser interface. Multiple users can access separate media streams simultaneously, all without internet access.

This project is compact, easy to modify, and includes optional 3D-printable hardware. Both firmware and web interface are fully open-source.

Get a Nomad

Build It Yourself (Recommended)

I strongly recommend building your own Nomad. It's not a very difficult project, if you can follow instructions and plug in a USB cable, you can do it. The parts are cheap, widely available, and the whole build takes under an hour. See Hardware Requirements and Quick Start below. If nothing else please check out the DIY option before purchasing.

Buy a Prebuilt

That said, I also won't say no to money. If you'd rather skip the DIY and get a ready-to-go unit, prebuilt Nomads are available at nomad.jcorptech.net.

Every Nomad, whether you build it or buy it, runs the same open-source firmware and web interface. When new features and updates are released, you can always flash the latest code yourself to stay up to date.

Support Development

If you just want to support the project, donations are always appreciated:
ko-fi.com/jcorptech

What's New in 4.6

exFAT Support

This is the big one, and it's the thing people have been asking for the longest. FAT32 has been Nomad's biggest limitation since day one, cards over 32GB needed a reformat first, and no single file could go over 4GB, which is why large ZIMs had to be split into parts. exFAT fixes both of those.

Cards mount as exFAT, FAT32 or FAT16, auto detected at boot, nothing for you to configure
SDXC cards (anything over 32GB) work exactly as they come out of the package, no reformat step at all
Single files can go over 4GB now, so a full size Wikipedia can sit on the card as one file instead of split parts
Old FAT32 cards keep working exactly like they always did, this is additive, not a migration
Writing to a nearly full card is a lot less likely to stall out, that was behind a lot of the upload and save timeouts

The reason this took so long, the Arduino ESP32 core ships a prebuilt filesystem library with exFAT compiled out of it, and there is no way to turn it back on from a sketch. The fix was to stop using it entirely and swap in SdFat, which brings its own filesystem code. Everything else in the firmware talks to it the same way it always did.

You'll need the SdFat library installed from the Arduino Library Manager before this will compile.

Offline Maps

Map regions live in /Maps and get browsed offline, with place search and real turn by turn directions (Drive and Walk)
Regions are prepped on your PC with Nomad Tools, which downloads the map picture and the road network for the areas you pick
Reads map data straight out of a packed archive instead of unpacking it onto the card, which keeps a region at roughly its download size instead of several times bigger

This one is the roughest of the bunch. It works, but it's slow, big regions take a while to draw. I'm still working on that, have a few ideas to improve the speed.

WiFi Mode (join your home network)

Instead of running its own hotspot, Nomad can now join a WiFi network you already have and serve everything to that network, the browser interface, DLNA, all of it. Your phone stays on your normal internet-connected WiFi and Nomad is just another device on it. This is also the fix for TV devices like Fire Sticks that refuse to do anything on a network with no internet.

Set it up from the admin panel: WiFi Mode button in the top bar opens a popup with a network scanner, password field, and an auto-reconnect option
The captive portal turns itself off in this mode (hijacking DNS on someone's home network is uhh.. lets say frowned upon), and the screen shows the IP address the router assigned instead of a hotspot name

TV Support (DLNA)

Nomad now shows up as a media server on anything that speaks DLNA - smart TVs, VLC, Kodi, Roku Media Player.

Browse Movies, Shows, Music and Gallery straight from the TV, with cover art, and seeking works
On the TV side there's nothing to set up, it just appears in the device list
Works on the hotspot or in WiFi Mode; for Fire Sticks use WiFi Mode and the VLC app, since Fire OS breaks without internet now (so lame)
Toggle it off in the admin panel if you don't want Nomad announcing itself / makes everything else a bit faster

Offline Translation

A Translate page that works with zero internet. Two people can pass a phone back and forth and each type in their own language.

Language packs live in /Translate on the card and are installed with Nomad Tools, which always grabs both directions of a pair
Translation runs in the browser of whoever connected, nothing heavy runs on the Nomad itself
will be very slow to load the first time, but after that back and forth is fairly quick, and the info is cached so its quick if you load it again.
I will be working on a voice integration on device for this aswell, but most keyboards include it already so voice to voice should be possible too.

Cookbook & Workshop

Two new library pages, both optional, both disabled by default.

Cookbook: drop .md, .cook or .json recipe files into /Cookbook (photos work, same-name image convention). Recipes render with ingredient and step checklists you can tick off while cooking.
Workshop: drop .stl, .3mf or .obj files into /Workshop and preview them in 3D right in the browser. A README or notes file in a folder describes every model in it. The viewer is a few hundred lines of raw WebGL, not a bundled 3D engine, so it stays fast off the card.
I think these are kinda dumb... but I needed a clean number of pages so this is what we get..

Game ROMs & Built-in Games

Drop ROMs into /Games and play them in the browser through EmulatorJS
Ships with Go, Chess, Connect Four, Tic-Tac-Toe, 2048, Minesweeper, Snake, Crazy Eights, Dots and Boxes, and a shared Whiteboard, all just plain HTML files
Also ships with DOOM - the shareware WAD is included, and any .wad you drop in /Games runs through the same engine (this is here so I can say it runs doom, you must keep this on the card it is load bearing.. I swear lol)
Cover art works the same as everywhere else, drop an image with the same name next to the file
Add or remove games by adding or deleting files, there's nothing to configure, this works for the inbuilt games aswell.

Local Multiplayer

Two player game rooms for multidevice use.
One person makes a room, shares the 4 character code, the other joins from their own phone
Chess, Go, Connect Four and Tic-Tac-Toe all support it, the Whiteboard is just a shared freeform board
There are also "pass and play games" that only need one device, I will eventualy make this an option for all of the defaults.
I plan to expand this so most games can run in pass and play or proper multi device mode.

Mk4 Highlights

Offline Wikipedia & Archive Support (ZIM)

Browse and search full offline Wikipedia (and other ZIM archives like Gutenberg and TED) directly from the SD card
Search is fast even on massive archives, the companion Nomad Tools app prebuilds a compact index on your PC, so the device never has to search the raw multi-gigabyte file itself
Embedded videos and epub books inside archives play/read right in the browser
Currently tested with Gutenburg epubs, TedX Videos, and wikipedia from the tiny 0.8 file all the way to the 140gb maxi with images.

Redesigned Case

New case slides together front-to-back instead of the old top-to-bottom design
No more direct pressure on the screen, which was a common cause of cracked/broken screens on the old case
Buttons stay exposed on the outside, so you can still flash firmware or hit the boot button without disassembling anything

Indexing & Stability

Root-caused and fixed a long-standing random reboot bug tied to files over 2GB, this was the actual cause of crashes on image-heavy Wikipedia pages and big movie scrubbing
Fixed a heap-corruption crash that could hit when indexing and refreshing SD totals at the same time
Boot-time indexing now only re-scans when files have actually changed, instead of a full scan on every boot
Removed the screens loading spinner that was silently forcing a full-screen redraw every loop, pulling it out made the whole device noticeably more stable

Reader & Memory Improvements

Comic and PDF readers now free old pages from memory as you scroll, fixing crashes on long comics and scanned PDFs
PDF viewer shows a real loading percentage instead of a blank screen
Cleaned out a bunch of dead code and unused libraries that were loading on every Books page

UI & Admin Updates

Unified header and button styling across pages so themes apply consistently everywhere
Fixed several dark mode readability bugs (unreadable resume text, buttons that ignored custom themes, etc.)
Admin panel settings are now gated behind a login
Fixed a stuck brightness slider caused by an out-of-range default value

Default Themes (28)

Default Blue, Forest Night, Cherry Blossom, Mocha Latte, Ocean Depths, Autumn Leaves, Lavender Fields, Sunset Horizon, Coral Reef, Mountain Mist, Jade Garden, Desert Sand, Arctic Aurora, DeLorean, Midnight Code, 90s Retro, Mint Breeze, Rose Gold, Crimson Night, Emerald Dream, Royal Purple, Copper Sunset, Sapphire Sea, Peach Cream, Slate Storm, Lime Zest, Burgundy Wine, Teal Oasis

Features

exFAT & FAT32: Any card format, auto detected at boot. Cards over 32GB and files over 4GB both work.
WiFi Mode: Join an existing WiFi network instead of running the hotspot, with automatic fallback so you can't lock yourself out.
TV Support (DLNA): Shows up as a media server for smart TVs, VLC, Kodi and friends, with cover art and seeking.
Offline Encyclopedia: ZIM archive support for offline Wikipedia and other offline wikis, with fast on-device search.
Offline Maps: Browsable map regions with place search and turn by turn directions, served straight off the card.
Offline Translation: In-browser translation between installed language pairs, no internet ever.
Games: Browser-based ROM playback through EmulatorJS, DOOM, plus ten built-in games.
Local Multiplayer: Two player game rooms over the Nomad's own Wi-Fi, no internet needed.
Cookbook: Recipe library with tick-off ingredient and step checklists.
Workshop: 3D-print model library with an in-browser STL/3MF/OBJ preview.
Subtitles: Sidecar subtitle files attach themselves to a video by filename, with selectable language tracks.
Chat: A simple local chat room for everyone connected to the Nomad.
Admin Panel: Full device controls, library indexing, Theme Customizer, menu page toggles, login-gated settings.
File Browser: Upload, rename, delete, download, and inline file editing. (Recommended to use a PC)
Global Search: Quickly find media across all categories from the Menu page.
Music Player: Seamless background playback with subdirectory playlists and a dynamic Queue.
Movies & Shows: Plyr-integrated playback with season/special folder support.
Digital Library: EPUB support, PDF handling, and a dedicated Comic/Webtoon reader.
Resume Tracking: Saves playback progress for Movies, Shows, and certain Books.
Gallery & Files: Dedicated pages for image viewing, video clips, and general file sharing.
Captive Portal: Automatic login/redirection for easy access.
Persistent Settings: Themes and system configurations saved across reboots.
Mobile-Friendly UI: Fully responsive design optimized for handheld offline streaming.

Hardware Compatibility

Nomad is built specifically for the Waveshare ESP32-S3 Dev Board (1.47" LCD version). Due to the number of low-level tricks used to squeeze this much functionality out of the hardware, it is difficult to get Nomad running on other boards.

There are a few community forks that target other ESP32 boards, but your mileage will vary. I'm also actively working on a Nomad Lite version with wider board compatibility, focused on basic streaming without all the advanced features.

Hardware Requirements

Waveshare ESP32-S3 Dev Board (1.47" LCD version) - Amazon Link
or the ESP32-S3-LCD-1.47B - the USB-C board. Same chip, same everything, the LCD backlight just moves from GPIO 48 to GPIO 46. Building it yourself, set BOARD_USB_C to 1 in Display_ST7789.h; flashing from the browser, pick the USB-C build. Get it wrong and it boots functional, just no screen output. - Amazon Link
microSD card, exFAT or FAT32 (16-128GB recommended, up to 2TB) Amazon Link
SD-Card Extender (optional, 3DP case compatible) Amazon Link
USB power source
Optional: 3D-printed enclosure (STL files included)

Flash It From Your Browser

If you would rather skip Arduino IDE entirely, nomadflash.jcorptech.net does the setup from a browser tab. The firmware is already compiled, so there is nothing to install and no SdFat version to line up. This system will lag a bit behind on the latest version, but makes setup much easier for most casual users.

It covers three things:

Flash the firmware. Plug Nomad into a USB port, pick a build, and it writes the bootloader, partition table and app in one image. Takes less than a minute.
Set up the SD card. Copies the web interface onto the card and creates every media folder Nomad uses, including Games, Maps, Cookbook and Workshop. There is an optional test set of placeholder content if you want to see every page working before you load your own media.
Update an existing card. Replaces only the interface files and leaves your media alone. (still WIP)

Both the main and experimental builds are there, and each is offered for both boards:

USB-A for the ESP32-S3-LCD-1.47
USB-C for the ESP32-S3-LCD-1.47B

Pick the one matching the connector on your board. The two differ only in which pin drives the LCD backlight, so flashing the wrong one boots fine but leaves the screen dark.

Formatting is the one step it cannot do, because a web page has no access to drives or partitions. You usually do not need it, since exFAT, FAT32 and FAT16 cards all mount as they come. If a card does need formatting, the site prints the exact command for Windows, macOS or Linux.

Requires Chrome, Edge or Opera on a desktop. It uses Web Serial and the File System Access API, which Firefox and Safari do not implement, and neither one works on iOS or Android.

Software Requirements

Arduino IDE, with the esp32 board package 3.3.3
Arduino libraries, exact versions. These are what the shipped build compiles against, and mismatches here are the single most common build failure:
- ArduinoJson by Benoit Blanchon 7.3.0
- Async TCP by ESP32Async 3.4.7
- ESP Async WebServer by ESP32Async 3.7.1
- LVGL by kisvegabor 8.4.0
- SdFat by Bill Greiman 2.3.0 - this one is required for exFAT, it is not optional
SquareLine Studio (optional, for UI editing)

If you would rather not line any of that up, use the browser flasher above.

Quick Start

Flash ESP32-S3 firmware from /firmware/.
Copy /SD_Card_Template/ files onto the card. Any exFAT or FAT32 card works as-is, you only need to format if the card is brand new or broken.
Place media in /Movies, /Shows, /Books, /Music, /Gallery, /Files, /Games, /Cookbook, /Workshop. (ZIMs, Maps and Translate packs get prepped with Nomad Tools, see below.)
Insert SD card and power device via USB.
Connect to Wi-Fi Jcorp_Nomad with password: password.
Open the browser interface.
Click the gear icon → Library Index → Full Scan Now.
Monitor Admin Console for progress; scan may take minutes.
Return to Menu page and enjoy your media!
Optional: to serve your home network (and TVs) instead of running a hotspot, open Admin → WiFi Mode and join your network from there.

Key Improvements

Faster & More Reliable Indexing
- Non-blocking, background indexing for large libraries.
- Safe on power loss; partial indexes remain intact.
- Auto-updates changes; frontend detects updates automatically.
- Boot-time indexing now only triggers on an actual file change, not every boot.
Resume Functionality
- Movies and Shows track playback progress.
- Options for Play from Start or Resume.
- Menu displays last three movies/shows; mobile shows most recent.
Dark Mode
- Toggleable across all pages from the menu.
- Consistent theme tokens across pages, no more mismatched dark colors.
Admin Page
- Full device control: shutdown, restart, flash mode, Wi-Fi, RGB LEDs, brightness, credentials, indexing, and file management.
- Login-gated settings so changes require the admin password.
- Safe shutdown option for SD card health.
- Real-time system console feedback.
Stability Improvements
- Fixed frontend NDJSON sync issues.
- Crash recovery on large indexes.
- Fixed a random-reboot bug tied to files over 2GB.
- Dynamic LCD brightness adjustment.
- Streaming stability enhancements.
Improved Library Support
- Supports deeper folder structures for Shows and Music.
- Flexible organization; media files can be nested at any level.

Folder Structure

/Movies
    Interstellar.mp4
    Interstellar.jpg

/Shows
    /The Office
        S01E01 - Pilot.mp4
        S01E02 - Diversity Day.mp4
    The Office.jpg

    /Gravity Falls
        /Season 1
            S1E1 - Tourist Trapped.mp4
            S1E2 - The Legend of the Gobblewonker.mp4
        /Season 2
            S2E1 - Scary-oke.mp4
            S2E2 - Into the Bunker.mp4
        Alex Hirsch Interview.mp4
    Gravity Falls.jpg

/Books
    The Martian.pdf
    The Martian.jpg
    /How to Train Your Dragon
        book1.pdf
        book2.mp3
        book1.jpg
        book2.jpg
    How to Train Your Dragon.jpg

/Music
    track01.mp3
    /Artist1
        track01.mp3
        /Album1
            track02.mp3
    /PersonName
        /Playlist1
            track01.mp3
        /Playlist2
            track02.mp3

/Gallery
    image01.jpg
    video01.mp4

/Files
    document.pdf
    example.txt

/Games
    Pokemon Red.gb
    Pokemon Red.png
    Doom.wad
    Chess.html
    Go.html

/Cookbook
    Grandma's Chili.md
    Grandma's Chili.jpg
    /Desserts
        Brownies.md

/Workshop
    /Brackets
        shelf bracket.stl
        README.txt

/Maps
    /pennsylvania
        manifest.json
        (map data, prepped with Nomad Tools)

/Translate
    manifest.json
    (language packs, installed with Nomad Tools)

/Archive
    wikipedia_en_all_maxi.zim
    /.nomad-zim
        (search index, built by Nomad Tools)

index.html
appleindex.html
menu.html
movies.html
shows.html
books.html
music.html
gallery.html
files.html
archive.html
games.html
maps.html
translate.html
cookbook.html
workshop.html
Logo.png
favicon.ico

Supported Formats

Video: .mp4, .webm, .m4v play everywhere. .mkv, .avi, .mov are listed and handed to the player too, but Nomad has no content type for them, so whether they play is down to your browser (Safari is usually fine with .mov, Chrome usually is not with .mkv). If a video lists but will not play, that is almost always this. Remux to .mp4 and it will.
Audio: .mp3, .flac, .wav, .ogg, .aac, .m4a, plus .opus with the same browser caveat as above.
Subtitles: .srt, .vtt, .ass, .ssa, .sub - drop them next to the video with the same name. Movie.srt or Movie.en.srt both attach, language suffixes become selectable tracks, and .srt is converted to WebVTT on the fly because browsers render nothing for raw SRT.
Books: .pdf, .epub, .cbz, .cbr
Images: .jpg, .jpeg, .png, .webp, .gif, .bmp, .avif
Archives: .zim (offline Wikipedia and other ZIM-format wikis), needs special processing, you cant just drop a .zim in sadly. Prep them with Nomad Tools first (still rough, but handles most common ZIMs)
Games: ROMs for the systems EmulatorJS supports (GB, GBC, GBA, NES, SNES, Genesis, and others), .wad files for DOOM, plus .html files for built-in games
Maps: map regions prepped with Nomad Tools, dropped into /Maps
Recipes: .md, .cook, or .json files in /Cookbook
3D Models: .stl, .3mf, .obj in /Workshop
Translation: language packs installed into /Translate with Nomad Tools

Nomad Tools

Some content needs a one-time prep step on your computer before Nomad can use it, ZIM archives need a search index built, maps need downloading, translation packs need fetching. Nomad Tools is a simple menu that does all of it. Windows and Linux (macOS untested).

Basic usage:

Download Nomad Tools and put your Nomad card in the computer.
Windows: double-click START-Windows.bat. Linux: run ./start-linux.sh.
Pick your card from the list (or type its path), then pick a job from the menu.

What the menu covers:

Add ZIM archives - copies Wikipedia/Gutenberg/etc. onto the card and builds the search index. Adds to what's there, never wipes your existing archives, and splits oversized files automatically.
Optimize cover images - shrinks Movie/Show/Book covers so pages load fast on the device.
Rebuild media index - refreshes the library listing after you've added or removed files from the PC.
Download offline maps - grabs map tiles for an area you pick, with a size estimate and free-space check before anything downloads.
Build a routing map - maps plus the road network and place search, for turn by turn directions. Pick from ready-made areas (any US state, big regions, or the whole country) and they join into one seamless map. US only for now
Add translation languages - installs offline translation packs, always both directions of a pair. Comes in collections (starter, traveler, europe, asia, world) or single languages. (I recomend just grabbing all as its less than 4GB)

A good order for a fresh card: media and ZIMs first, optimize images, rebuild the index last. Maps and languages can be added any time.

Known Rough Edges

Everything here works, but these are the parts I already know aren't great:

Maps are slow. Big regions take a while to load and pan. It works, it's just not snappy yet, and that's the main thing I'm working on.
WiFi Mode and DLNA have seen few routers and few TVs. They work (tested with VLC on a Fire Stick, desktop VLC, and phones), but there are a lot of both out there and I have tried a handful. If your TV can't find Nomad, tell me what TV it is and I will see what I can do.
Some video containers list but won't play. .mkv, .avi and .mov get served without a content type, so it comes down to what your browser will sniff and decode. Nothing is broken on the Nomad side.
Set an admin password before using WiFi Mode. On the hotspot only people you gave the password to can reach the admin panel. On your home network, everything on that network can. I dont hard gate this, but worth noting.
Free space on FAT32 cards can read slightly wrong. SdFat doesn't update the counter FAT32 keeps for it, so the number drifts by however much Nomad itself writes. It fixes itself the next time you plug the card into a PC, and it doesn't affect your files at all. exFAT cards aren't affected.
EmulatorJS cores download on first play. Once cached they're fine, but the first launch of a system pulls the core off the card and takes a moment.
The newer features have had a fraction of the testing the core has. If something breaks, tell me. Issues and PRs are both welcome.

What's Next

Nomad Lite - A stripped-down version of Nomad with wider board compatibility, focused on core streaming features. In active development now that Mk4 is out.

Gallion - A larger-scale sibling to Nomad, built on more capable hardware. Gallion is designed to handle everything that couldn't fit on Nomad's current platform > ROM emulation, 4k video, and expanded media compatibility across the board. The current version is here.

ESP32-P4 - I have said for a long time that I don't want to switch hardware, as doing so would leave yall with a useless board. The S3 is the Nomad and it stays supported. That said, I have started slowly co-developing a P4 version alongside it, because the P4 brings two things the S3 can't: a radio module that is already FCC certified, which matters a lot for anything I sell, and considerably faster WiFi.

Two boards, if it works out. The WIFI6 board is a stick, only a bit larger than the Nomad you have now. The NANO is noticeably bigger than either, but it adds an ethernet port with POE module support, and a USB port so storage can be expanded or replaced rather than living entirely on the SD card.

None of this is a replacement announcement. It will be its own branch, the S3 keeps getting the same updates, just better speed and a few more features on the p4 branch.

Project Inspiration

Inspired by my experience running a Jellyfin server, I wanted a portable, low-cost solution for offline media streaming. Challenges with SBCs (Raspberry Pi, etc.) included high power usage, heat, and instability.

Nomad focuses on delivering:

Offline access
Wide device compatibility
Simple frontend for media browsing and playback
Multiple user support
High customization potential

The ESP32-S3 provides enough performance to handle these requirements efficiently, in a pocket-sized form factor.

License

CC BY-NC-SA 4.0 - free to remix and share for non-commercial use with attribution.

Credits

Developed by Jackson Studner (Jcorp Tech). Inspired by open-source offline media projects. Contributions via PRs welcome.

Name		Name	Last commit message	Last commit date
SD_Card_Template		SD_Card_Template
docs		docs
firmware/JcorpNomadProject		firmware/JcorpNomadProject
tools/handbrake		tools/handbrake
.gitattributes		.gitattributes
.gitignore		.gitignore
LICENSE.md		LICENSE.md
NomadCasev30.stl		NomadCasev30.stl
NomadCasev30_USB-C.stl		NomadCasev30_USB-C.stl
NomadCoverMK4v2.png		NomadCoverMK4v2.png
NomadMk4Explode.png		NomadMk4Explode.png
NomadNewScreen.png		NomadNewScreen.png
README.md		README.md
sync_card.py		sync_card.py

Latest commit

History

Folders and files

Repository files navigation