🇺🇸 English Version | 🇰🇷 한국어 버전
Home Assistant integration for monitoring and controlling EFM ipTIME routers over your local network. No SNMP setup is required.
- Router information, firmware updates, WAN IP and DNS
- Wi-Fi switches and channel selection
- WAN/LAN link speed, packet activity and Internet Status
- WireGuard server control and latest peer handshake information
- EasyMesh controller settings for wired backhaul lock, dense deployment, RSSI threshold and steering level
- EasyMesh router mode and connected Agent count
- Individual device trackers for selected devices, grouped under one Home Presence device
- Security settings, GeoIP, port forwarding and UPnP
- Night LED, scheduled reboot and a reboot button in Diagnostics
Available features depend on the router model and firmware.
Open the link above, install ipTIME Manager in HACS, and restart Home Assistant.
Copy custom_components/iptime_manager into your Home Assistant config/custom_components/ directory and restart Home Assistant.
- Open Settings → Devices & services → Add integration.
- Search for ipTIME Manager.
- Choose Add a router or Add a presence sensor list.
- For a router, enter its address and administrator credentials. For Home Presence, select devices and name each sensor when available.
Home Presence can also be created before a router is configured, initially with no trackers. After adding a standalone router or EasyMesh controller, open Home Presence options to select devices and name each sensor. Each selected device gets its own named device tracker under the Home Presence device. Devices are checked across all configured routers, including Agents.
When adding a router, use its management address, for example http://192.168.0.1. Include the port if it uses a custom management port.
- WAN/LAN Port shows the physical connection. WAN/LAN Status shows recent traffic activity; an idle device can be off.
- Internet Status checks external access from Home Assistant and assumes HA uses this router for Internet access. It is omitted in detected hub/AP mode; cabling-only hub setups may not be recognized.
- WireGuard Last Handshake shows the latest handshake time, which can update during a connection.
See the changelog for release and development changes.
Report issues through GitHub Issues, including your router model, firmware and Home Assistant version. Remove credentials from logs before sharing them.