Conversation
qcomlnxci
requested review from
a team,
aiquny,
Amit Kucheria (idlethread) and
Kaushal Kumar (quic-kaushalk)
and removed request for
a team
August 18, 2026 14:25
LXQUALCOMM
force-pushed
the
tech/all/dt/hamoa
branch
from
August 24, 2026 08:02
106f486 to
affc288
Compare
anan-tiwa
force-pushed
the
edp_overlay_hamoa
branch
from
August 26, 2026 10:05
c58568b to
50b7d66
Compare
LXQUALCOMM
force-pushed
the
tech/all/dt/hamoa
branch
from
September 1, 2026 08:45
affc288 to
3f57af0
Compare
LXQUALCOMM
force-pushed
the
tech/all/dt/hamoa
branch
from
September 15, 2026 08:51
3f57af0 to
c439eb1
Compare
Add support for SYSTEM_RESET2 vendor-specific resets as reboot-modes in the psci node. Describe the resets: "bootloader" will cause device to reboot and stop in the bootloader's fastboot mode. "edl" will cause device to reboot into "emergency download mode", which permits loading images via the Firehose protocol. Signed-off-by: Xin Liu <xin.liu@oss.qualcomm.com> Link: https://lore.kernel.org/all/20260226054113.4156874-1-xin.liu@oss.qualcomm.com/
On Qualcomm Hamoa SoCs, the memlat governor and the mechanism to control the LLCC and DDR/DDR_QOS is hosted on the CPU Control Processor (CPUCP). Add the vendor protocol node to the existing SCMI transport to enable QCOM SCMI Generic Extension protocol on Hamoa SoCs. Link: https://lore.kernel.org/lkml/20260507062237.78051-9-sibi.sankar@oss.qualcomm.com/ Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Add Battery Current Limiting (BCL) hardware monitor node for pm8550 PMIC. The BCL monitors battery voltage and current, providing hardware interrupts when configurable thresholds are violated. Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260722-qcom-bcl-hwmon-v2-7-febe2805e17b@oss.qualcomm.com
Hamoa IoT EVKs are available with and without an eDP panel. When the panel is absent, DP3 is unused, but the base DTS still describes the eDP panel and display path. This causes the eDP driver to probe an unavailable panel, resulting in AUX probe timeouts and missing display modes. Userspace then attempts display commits through the eDP connector, causing repeated DPU vblank, frame-done, and IRQ timeout errors. Move the eDP-specific nodes into an overlay so the base DTB describes the configuration without the panel, while the overlay enables eDP for boards with the panel connected. DT overlays cannot remove properties from a node defined in the base DTB, so the /delete-property/ of #sound-dai-cells is moved into the base DTS instead of the overlay, where it takes effect. Link: https://lore.kernel.org/all/20260818-edp_overlay_for-next-v2-1-bd811d378fb7@oss.qualcomm.com/ Signed-off-by: Anand Tiwari <anand.tiwari@oss.qualcomm.com>
Purwa IoT EVKs are available with and without an eDP panel. When the panel is absent, DP3 is unused, but the base DTS still describes the eDP panel and display path. This causes the eDP driver to probe an unavailable panel, resulting in AUX probe timeouts and missing display modes. Userspace then attempts display commits through the eDP connector, causing repeated DPU vblank, frame-done, and IRQ timeout errors. Move the eDP-specific nodes into an overlay so the base DTB describes the configuration without the panel, while the overlay enables eDP for boards with the panel connected. DT overlays cannot remove properties from a node defined in the base DTB, so the /delete-property/ of #sound-dai-cells is moved into the base DTS instead of the overlay, where it takes effect. Link: https://lore.kernel.org/all/20260818-edp_overlay_for-next-v2-2-bd811d378fb7@oss.qualcomm.com/ Signed-off-by: Anand Tiwari <anand.tiwari@oss.qualcomm.com>
anan-tiwa
force-pushed
the
edp_overlay_hamoa
branch
from
September 25, 2026 11:32
50b7d66 to
027317e
Compare
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
4 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Both Hamoa and Purwa IoT EVKs are available in headed and headless
variants. The headed variants use an eDP display panel connected via
the DP3 controller, while the headless variants do not include a
display.
The existing DT is causing the eDP-panel driver to probe an unavailable
panel, resulting in AUX probe timeouts and missing display modes.
Userspace then attempts display commits through the eDP connector,
causing repeated DPU vblank, frame-done, and IRQ timeout errors.
Move the eDP-specific nodes out of the base DTS files into separate
DTBO overlays for each board. This allows the base DTBs to be used
as-is for headless variants, while the composite DTBs enable eDP
support on headed variants.
CRs-Fixed: 4543794, 4543797