cubecell

Heltec CubeCell Series (based on ASR6501, ASR6502 chip) Arduino support.

Small repeater node for the meshtastic project.

ASR Microelectronics ASR650x: development platform for PlatformIO

Estación metereológica DIY con comunicaciones LoRaWAN TTN

LoRa APRS Tracker for Heltec Cubecell GPS Boards

PCB design of breakout board for Ebyte E78 (ASR6501 or ASR6601) module

It's an IoT DIY project which notifies you when you have received a parcel or a letter in your letterbox. This project uses an HelTec AB01 LoRaWAN module to send data over an LoRaWAN Gateway when WiFi is out of range. I use an Helium Gateway from the People's Network in order to forward packets over Helium Network which send data to AWS IoT Core…

This DIY project is a LoRaWAN Rain Gauge based on CubeCell HTCC AB01 development Board.

Heltec CubeCell mit BME280

A physical mailbox that sends you a message via LoRaWAN once you receive a letter.

LoRa mini air quality drone onboard station

Low-power MeshCore-compatible repeater for Heltec CubeCell AB02A (SX1262)

This page includes all information and codes to developp both a simple datalogger or a more complex LoRaWAN weather station based on a low-cost arduino-based approach

Experiments to interact with Meshtastic

LoRa RX-Finder für Heltec CubeCell (ASR6502) @ 433 MHz — RSSI hot/cold. PlatformIO/heltec-cubecell, flashfertige .cyacd/.hex. ☕ paypal.me/Freakbank1

Project III- Univalle 2023 LoRa-IoT platform

presentation, report and code for module sensor networks of HTW Dresden (I771)

Configuración básica para conectar un sensor DHT22 a un CubeCell HTCC-AB02 y enviar sus datos a otro CubeCell HTCC-AB02 mediante LoRa.

Configuración básica de dos dispositivos CubeCell HTCC-AB02 para comunicarse entre ellos mediante LoRa.